HOBAS Filament Wound Bends
HOBAS Filamanet Wound (FW) bends are available in standard angles of 45° and 90°. Other angles are available on request.
| Physical Properties | |
| Nominal Diameter [DN] | 25 - 4500 mm |
| Nominal Pressure [PN] | 1 - 40 bar |
| Pipe TYPE D | Bends on base of UP- and vinylester-type resin, glass fiber reinforced with laminated ends, bothside formed or wet pressed collars and floating flanges, in compliance to DIN 16966, part 2. |
| Pipe TYPE E | Bends on base of UP- and vinylester-type resin, glass fiber reinforced with laminated ends, bothside formed or wet pressed collars and floating flanges, in compliance to DIN 16966, part 2. |
| Pipe TYPE N | Bends on base of UP- and vinylester-type resin, glass fiber reinforced with laminated ends, bothside formed or wet pressed collars and floating flanges, in compliance to DIN 16966, part 2. |
| Pipe TYPE B | Bends on base of UP- and vinylester-type resin, glass fiber reinforced with thermoplastic liner with laminated ends, bothside formed or wet pressed collars and floating flanges, in compliance to DIN 16966, part 2. |
For technical details, possible configurations and information regarding installation please contact your HOBAS Sales Representative.